An economical method of biofuel production

Fuels made from plant materials could play a role in the move to more sustainable energy production. A new costing study suggests that large-scale biomass-to-liquid (BTL) plants could manufacture such synthetic fuels ('biosynfuel') at a cost of about 1 Euro per kg in central Europe.

Under the EU Climate Action and Renewable Energy package1 Member States need to source a minimum of 10 per cent of their road transport energy needs from renewable energy by 2020.

Biosynfuels are a type of biofuel that are produced via synthetic gas or 'syngas' a blend of carbon monoxide and hydrogen. Syngas can be produced from any organic carbon material including coal but the BTL process uses a variety of bulk plant material (biomass) as feedstock including plant residues such as dry forest products (waste timber tree bark) and agricultural materials (straw); it can also use waste paper and cardboard. This helps to reduce the competition between crops grown for food and those grown for biofuels.

BTL technology is complex and requires high levels of investment in large-scale plants. In order to calculate how much a BTL plant would cost to develop the researchers modelled the costs of producing syngas using the 'bioliq' process developed in Germany and partly funded by the EU RENEW2 project. These costs were based on existing production plants using two similar conversion processes - coal to liquid (CTL) and gas to liquid (GTL) technology as found in production plants in South Africa. Extra costs associated with BTL compared to CTL and GTL are accounted for. These include the cost of the extra oxygen required during production and the cost of removing impurities from raw biosyngas.

The plant and waste feedstock material is bulky and large quantities are required to make biosynfuel. The researchers suggest it is more economical to collect the material in a number of local centres first where it undergoes pyrolysis (heated in the absence of air) to produce a concentrate. This can be then more easily transported to a large-scale plant via rail. This also minimises traffic congestion from delivery vehicles around any single plant. At the central large-scale plant the concentrated material is converted to syngas.

Finally the syngas is purified and can be turned into synthetic motor fuel such as methanol hydrogen and synthetic diesel (biodiesel) or other useful chemicals. The study suggests that for a BTL plant with a raw output capacity greater than 1 million tonnes per year 1 litre of biosynfuel would cost about 0.8 Euros (about 1.04 Euros per kg). Allowing a 30 per cent margin for uncertainty biosynfuel could cost between 0.56 and 1.04 Euros per litre.

Biomass production and delivery costs are high in central Europe and contribute to about half of the total costs of producing synthetic fuels. The other half comes from the technical costs for the pyrolysis and biosynfuel production plants. For comparison researchers estimated the cost of a litre of conventional motor fuel without tax as 0.56 Euros achieved when the price of crude oil is 75 Euros ($100) per barrel.

In developing countries where the cost of biomass inputs are lower biosynfuel could be produced more cheaply and would be able to compete with the cost of fossil fuels earlier than in industrialised countries. With increasing use of vehicle transport it is likely that natural gas and coal reserves will continue to be used as energy sources. The researchers suggest future supplies of biosynfuels will not be sufficient to meet this growing demand for liquid fuels. However it is possible to combine BTL technology with existing CTL and GTL technologies in mixed plants.

If waste CO2 can be captured and stored from these combined plants this development will help to mitigate against climate change. However it should be remembered that carbon capture and storage represents an additional cost and is itself an energy intensive process. It is also unlikely to be realised before 2020.

Back to Index